Ericsson T68m User Manual page 44

Note: To see the status of GPRS coverage and
connection, slide the volume key up or down from
standby to enter the Status menu and then scroll to
GPRS.
Sent and received data
You can check how much data you have sent and
received, using GPRS.
• Scroll to Calls/Data counters, and select Last session
or Total data.
WAP profile settings
The WAP settings are stored in a WAP profile. In most
cases you only need to use one profile to access the
Internet.
You set up and use additional WAP profiles, for
example, when accessing secure Internet sites, such as
a banking site or a corporate intranet. You then simply
switch between profiles when you need to change the
network connection.
To enter WAP profile settings manually
1. Make sure you have a data account set up between
your phone and the Internet server, as described in
"Data account settings" on page 42.
44 Setting up mobile Internet
2. Scroll to WAP services,
3. Select the profile that you want to edit and press
4. Scroll to Rename,
YES
5. Scroll to Chg homepage,
WAP page you want to have as homepage.
6. Scroll to Save to,
YES
add during browsing should be available for all your
WAP profiles or only for the WAP profile you are
currently using and press
7. Scroll to Gateway,
YES
For GPRS and GSM, select IP settings,
as described in "To enter IP settings" below.
For SMS, scroll to Change type/SMS/SMS settings.
Continue as described in "To enter SMS settings"
below.
To enter IP settings
1. Select Connect using,
want to use when browsing,
2. Scroll to IP address,
WAP gateway, YES .
3. Scroll to User id,
YES
gateway.
, WAP settings,
YES YES
. Enter a name for the profile.
. Enter the address of the
YES
. Select if the bookmarks that you
.
YES
.
. Continue
YES
. Select the data account you
YES
.
YES
. Enter the IP address of the
YES
. Enter your user id for the WAP
.
.
YES