Ericsson T68m User Manual page 43

• Allow calls (Preferred service) – if you want to be
able to accept incoming calls during a GPRS
session, select Automatic. If not, select GPRS only.
• IP address – the IP address that the phone uses
when communicating with the network. If you do
not enter an address, the network provides you with
a temporary IP address.
• Advan. settings (Advanced settings) – these are
optional. Consult your network operator.
GSM settings include some settings that are
similar to GPRS settings and some which are
GSM specific as follows:
• Phone number – the phone number of your
Internet service provider.
• Data rate – select the speed you want for the
connection.
• Dial type – select analogue or ISDN connection.
Note: If you want to change access type, you have to
create a new data account and select the access type
you want to use.
To create a data account manually
1. Scroll to Connect,
YES
Data accounts, , Add account?,
YES
2. Select an access type.
3. Enter a name for the data account.
4. Enter the settings that you have received from your
network operator or service provider.
Confirm each setting by pressing
5. Scroll to Save?,
.
YES
To edit a data account
1. Scroll to Connect,
YES
Data accounts, .
YES
2. Select a data account,
3. Select Edit.
4. Select the setting you want to edit,
setting, .
YES
5. Repeat step 4 for other settings you want to edit.
Preferred service
You can set GPRS or GSM as the preferred service.
This setting is valid for all data accounts.
• To select preferred mode, scroll to Connect/Data
comm./Pref. service and select GPRS and GSM or
GSM only.
Setting up mobile Internet
, Data comm., ,
YES
.
YES
.
YES
, Data comm., ,
YES
.
YES
. Edit the
YES
43