Ericsson T68m User Manual page 19

Note: To send a ring signal or melody in a text
message, see "To insert an object in a text message"
on page 48.
Receiving melodies
When you receive a sound or melody via IR, Bluetooth
wireless technology or WAP, the message "New
melody Save melody?" appears. Press
My melodies.
If you use infrared make sure that the infrared ports
are facing each other.
• To turn the ring signal on or off, press and hold
from standby and select Turn on silent or
Turn off silent.
All signals except the alarm and timer signals are
turned off.
Increasing ring
You can choose a ring signal that rises in steps
from the lowest volume to the highest.
• To turn increasing ring On or Off; scroll to
Settings/Sounds & alerts/Increasing ring.
Specific ring signals for personal calls
If you subscribe to the Two Line Service, you
can set different ring signals for the two voice
lines. Line 1 and Line 2 are displayed instead
of Voice calls. If your SIM subscription supports fax
and data calls, you can set different ring signals for
voice, fax and data calls respectively.
to save it in
YES
Identification (CLI) service, you can assign a Personal
ring signal to up to ten callers.
To set a specific ring signal for a caller
1. Scroll to Settings,
Ring signals,
2. Enter the first letter of the contact name,
3. Select a contact,
4. Select a ring signal,
Sounds & alerts
You can choose to be notified of an incoming call by
the buzzing of the vibrating alert. You can set the
phone's vibrating alert to one of the following:
• On – all the time.
• On if silent – on when the ring volume is turned off or
when you have set the phone to silent.
• Off – all the time.
If your subscription includes the Calling Line
, Sounds & alerts,
YES
, Personal rings,
YES
.
YES
YES .
Personalizing your phone
,
YES
, Add new?, .
YES YES
.
YES
19