Setting Up Your Computer; Initial Setup - Ericsson T60d User Manual

Setting Up Your Computer

To operate properly with the modem in your Ericsson
mobile phone, make sure that your computer has the
following hardware and software:
• A functional serial port
• An operating system that supports data access
software, such as Windows 95 or Windows 98
• Appropriate fax (class 2.0), Internet access, or file
transfer software
Note! Class "2.0" is different from Class "2".

Initial Setup

Successful first-time setup of your phone and computer
for data operation involves the following steps:
1 Connect your computer to your
phone with your Ericsson DRS-
11 serial interface cable. The
cable has a plug on one end that
matches the receptacle on the
bottom of your Ericsson mobile phone. The other
end of the cable has a 9-pin female connector that
matches the standard 9-pin serial interface port
connector. Connect one end of the cable to your
Ericsson mobile phone and the other end to the
serial port on your computer.
Note! If you are trying to connect to a 25-pin serial
interface port on your computer, you will need an
adapter. You can purchase a 25-pin serial interface
port adapter at most computer supply stores.
2 Install your modem control software (driver).
The modem driver that you need for your Ericsson
mobile phone is available at
http://mobileinternet.ericsson.com. Refer to this
web site for help with installing drivers for different
operating systems.
3 Set up your data access software according to the
instructions supplied on
http://mobileinternet.ericsson.com.
Making Data and Fax Calls
75