Voice Dialing - Ericsson T60d User Manual

Recording a Contact Name
1 Scroll to
Settings
VoiceCommands
,
Voice Label OK
2 Select a contact and press
3 Follow the instructions in the display.
Note! An icon ( ) appears next to the contact names
which have a voice command.
Caller Name
You can choose whether you want to hear the recorded
voice command for a name when you receive an
incoming call.
1 Scroll to
Settings
,
VoiceSettings
2 Select or
On Off
, ,
Select Voice Control
, , ,
Select Contacts Select
.
.
OK
, ,
Select Voice Control
, ,
Select Caller Name Select
.

Voice Dialing

, ,
Select
,
Add
Voice Activated Dialing
1 From standby, press and hold either the upper or
lower side volume key until you hear a tone.
2 Release the upper or lower side volume key, lift the
phone to your ear and say a name, for example
"John" after the tone. The name is played back to
you.
3 If you have saved several numbers for that contact:
After a second tone, say a number type that you
have recorded earlier, for example "home". The
number type is played back to you, and the call is
, ,
Select
connected.
.
Note! Only the number types available for that contact
are played to you.
are not available for voice dialing.
From standby, you can also initiate voice dialing and
voice control of voice memos by:
• pressing either the upper or lower side volume key.
Using Voice Commands
and number types
Other Fax
53