Calling Contacts - Ericsson T60d User Manual

Using the Phonebook
menu, and then selecting
the phone number whenever there is a stop.
A pause temporarily suspends transmitting numbers for
approximately two seconds before sending the next
series. You can enter a pause in a series of digits by
pressing and holding
For example, if your office has a voicemail system that
requires you to dial a phone number, followed by your
extension, followed by an access code, you could enter
the following:
555-1111 2222 33333.
When you press the left softkey, your phone dials the
number and then stops transmitting tones. When your
voicemail system asks for your extension you would press
the left softkey to transmit your extension. The access
code is sent after the pause. If the timing in your
voicemail system does not allow for pauses, you can enter
a stop instead of the pause, or use multiple pauses.
You can also store groups of numbers which can include
stops and pauses in a location. You can then dial the
numbers by entering the location and pressing
42
. A is shown in
Insert Stop
until is shown in the display.
*

Calling Contacts

You can find and call a phone number saved in a contact
by searching for either the first or last name, depending
on which sort order you have set.
Selecting a Sort Order
1 Scroll to
Sort Order
2 Select a sort order and press
Calling Contacts
1 Scroll to
2 You will see your contact list. Scroll through the list
using your joystick and press the left softkey when
the number you want to call is highlighted.
3 Press the left softkey to make the call.
Shortcuts to Contacts
.
CALL
When in standby, you can find a contact by pressing and
holding one of the keys
with a specific letter.
, ,
Phonebook Select Options
, .
Select
.
OK
, ,
Phonebook Select Call Contact
- to find a contact beginning
2 9
, ,
Select
, .
Select