Part Identification Chart - NordicTrack NTEX84017.2 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M4 x 16mm M6 x 16mm
M6 Large M6 Split M8 Locknut
Screw (49)–4
Screw (33)–2
Washer (35)–2 Washer (34)–2 (25)–2
M6 x 40mm
M8 x 15mm M8 x 20mm M8 x 30mm
Screw (27)–6
Screw (24)–4 Screw (42)–1 Screw (41)–1
M8 x 40mm M8 x 63mm Bolt
Screw (28)–4 (26)–2
M10 x 80mm Screw (21)–4
6