Introduction
2.1
Purpose of this documentation
These instructions contain all information required to commission and use the devices. Read the
instructions carefully prior to installation and commissioning. In order to use the devices
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the devices, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
2.2
Document history
The following table shows major changes in the documentation compared to the previous
edition.
Edition
07/2023
03/2022
2.3
FW revision history
SITRANS CC220
Firmware revision Date
1.01.00
1.00.01
1.00.00
SITRANS MS200
Firmware revision Date
1.0.0
2.4
Designated use
Use the device in accordance with the information on the nameplate and in the Technical
specifications (Page 85).
SITRANS SCM IQ: Smart Condition Monitoring with IIoT Sensors
Operating Instructions, 07/2023, A5E50573389-AD
Remark
•
SITRANS CC220 hardware change
•
Firmware update of SITRANS CC220
•
LED blinking behavior
New chapter: Enabling existing Insights Hub Assets for SITRANS SCM IQ (Page 51)
Revised chapter: Training anomaly detection models (Page 57)
Changes
07/2023
New hardware, firmware update with USB stick
11/2021
Stability improvement
08/2021
Initial release
Changes
08/2021
Initial release
2
9