Sony Ericsson R600 User Manual page 48

Sony ericsson r600: user guide
Table of Contents

Advertisement

To set which data account to use
1. Scroll to WAP services,
2. Select the data account that you want to use or select
Always ask if you want to be asked every time you
try to connect,
.
YES
WAP profile settings
The WAP settings are stored in a WAP profile. In
most cases you only need to use one profile to access
the Internet.
You set up and use additional WAP profiles to enable
access to, for example, to secure Internet sites, such as a
banking site or a corporate intranet. In some cases you
may also need to set to use another data account.
To enter WAP profile settings manually
1. Make sure you have a data account set up between
your phone and the Internet server, as described in
"Data account settings" on page 46.
2. Scroll to WAP services,
profiles,
.
YES
3. Select Add profile? to add a new profile or select an
exisiting profile that you want to edit,
• When selecting Add profile? enter a name for the
profile,
and enter the IP address:,
YES
Address" on page 48. A list appears in the display.
48
Using mobile Internet
, Data accounts,
YES
YES
, WAP settings,
, WAP
YES
YES
.
YES
. See "IP
YES
• Select an existing profile, you can Edit, Rename,
.
Delete or Set as default.
4. Select Edit and press
5. You can now do the following:
• Chg homepage – Enter a title and a site address.
• IP address – WAP gateway server address.
• User id – Enter your user id for the WAP gateway.
• Password – Enter your password for the WAP gateway.
• Data mode – Select a data connection mode.
• Security – See WAP security settings.
The first WAP profile that you create is automatically
set as default. If you create more than one WAP
profile and want to set one of those as default, scroll
to WAP services,
profiles,
YES
IP Address
An IP address consists of four groups of digits, with
a maximum of three in each group. If one of your
digit groups consists of only one or two digits, you
have to enter a leading zero (0) for each digit that is
missing. Example: If the IP address is 123.4.67.201,
write 123.004.067.201.
.
YES
, WAP settings,
YES
, select a profile
, Set as default,
YES
, WAP
YES
.
YES

Advertisement

Table of Contents
loading

This manual is also suitable for:

R600s

Table of Contents