Getting Started; Connecting And Removing Your Battery; Removing The Battery Cover; Attaching The Battery - Ericsson R300d User Manual

Getting Started

Getting Started
Note! Prior to assembling and using your phone, you may want to read
"Guidelines for Safe and Efficient Use" on page 2.

Connecting and Removing Your Battery

Note! You can find your phone's model number by removing the battery
and looking on the back of the phone.

Removing the Battery Cover

1 Use a penny or dime
to turn the latch
counterclockwise.
2 Once the screw has been
loosened sufficiently,
remove the battery cover.
8

Attaching The Battery

1 Locate the connector at
the end of the red, black
and blue wires. Hold the
connector with the black
wire on the left and the
red wire on the right as
you face the back of the
phone. Insert the plug as
shown in the diagram.
Note! The plug will only
properly fit one way.
Do not force it.
2 Holding the battery at
a perpendicular angle
(instructional diagram
side down), slip the left
side of the battery into
the hinge. Then snap
the right side in.
3 Lower the battery until it
lays flat.