Garland GEISER 281 G Instruction Manual page 29

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 18
8. TROUBLESHOOTING
Should your machine not start and based on the symptons you will be able to detect the probable cause and
solve the problem:
Compression of
cylinder is normal
Yes
Yes
Low compression
Engine does not move
Spark plug is ok
There is water in the petrol
Yes
No
The spark plug pipe is not
Piston and segments are worn
Yes
29/100
Probable cause
No petrol in the deposit
The petrol filter is dirty
Petrol being used is not
adequate
The carburetor is dirty
The switch is in the OFF
position
Spark plug dirty
connected
Spark plug is loose
out
Cylinder is scraped
Engine burnt out
English
Corrective action
Refill with petrol
Clean the filter
Replace
Change petrol for correct
petrol
Take your machine to
service dealer
Put the switch in the ON
position
Clean the spark plug
Connect the pipe
Tighten spark plug
Take your machine to
service dealer
Take your machine to
service dealer
Take your machine to
service dealer

Advertisement

Table of Contents
loading

Table of Contents