uuIndicatorsu
Indicator
Name
System
Message
Indicator
Turn Signal
Indicators
High-Beam
Indicator
*1:On the left: Models without full color display
On the right: Models with full color display
72
On/Blinking
Comes on for a few seconds
●
when you set the power mode
to ON, then goes off.
Comes on along with a beep
●
when a problem is detected. A
system message on the multi-
information display appears at
the same time.
Blink when you operate the
●
turn signal lever.
Blink along with all turn
●
signals if you press the hazard
warning button.
Comes on when the high
●
beam headlights are on.
Explanation
While the indicator is on, press the
●
(information) button to see
the message again.
Refer to the Indicators information in
●
this chapter when a system message
appears on the multi-information
display. Take the appropriate action for
the message.
The multi-information display does not
●
return to the normal screen unless the
warning is canceled, or the
button is pressed.
Does not blink or blinks rapidly - A
●
turn signal light bulb has blown.
Change the bulb immediately.
2 Replacing Light Bulbs P. 433, 436
—
Message
*1
—
—
—
—
—
—