Acura ILX 2017 Owner's Manual page 469

uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
Pressure Gauge
Sealant/Air Hose
Valve Stem
Pressure Relief Button
468
7. Press the inflator switch to turn on the
compressor.
The compressor starts injecting sealant
u
and air into the tire.
8. When the sealant injection is complete,
ON
continue to add air.
9. After the air pressure reaches to specified
pressure, turn off the kit.
OFF
u To check the pressure, occasionally turn
off the compressor and read the gauge.
u Refer to the driver's doorjamb label for
the specified pressure.
10. Unplug the power plug from the accessory
power socket.
11. Unscrew the sealant/air hose from the tire
valve stem. Reinstall the valve cap.
12. Press the pressure relief button until the
gauge returns to 0 psi (0 kPa).
1Injecting Sealant and Air
If the required air pressure is not reached within 15
minutes, the tire may be too severely damaged for
the kit to provide the necessary seal and your vehicle
will need to be towed.
See an Acura dealer for a replacement sealant bottle
and proper disposal of an empty bottle.