Accessories; Optional Parts - Fujitsu Airstage ARXP018GLAH Installation Manual

Table of Contents

Advertisement

2.3. Accessories

For installation purposes, be sure to use the parts supplied by the manufacturer or
other prescribed parts.
The use of non-prescribed parts can cause serious accidents such as the unit to fall,
water leakage, electric shock, or fi re.
The following installation parts are furnished. Use them as required.
Keep the Installation Manual in a safe place and do not discard any other accessories
until the installation work has been completed.
Do not discard any accessories needed for installation until the installation work has been
completed.
Name and Shape
Operating manual
Installation manual
Cable tie (Large)
Cable tie (Medium)
Coupler heat insulation
(Small)
Coupler heat insulation
(Large)
Special nut A
(Large flange)
Special nut B
(Small flange)
Hanger
Drain hose
Hose band
Drain hose insulation
WARNING
Q'ty
Application
1
(This book)
1
For fixing the connection pipe (Large
and Small) and drain cap
5
For transmission and remote
controller cable binding
3
For indoor side pipe joint (Small)
1
For indoor side pipe joint (Large)
1
For suspending the indoor unit from
ceiling
4
4
For suspending the indoor unit from
ceiling
4
For installing drain pipe
VP25 (O.D.32, I.D.25)
1
For installing drain hose
1
Insulates the drain hose and drain
cap
2

2.4. Optional parts

When connecting the square duct and round duct, use the optional square flange or
round fl ange.
Square fl ange
Model name : UTD–SF045T (P/N 9098180007)
40 mm
Round fl ange
Model name : UTD–RF204 (P/N 9093160004)
85 mm
Long-life fi lter
Model name : UTD–LF25NA (P/N 9079892004)
507 mm
Other optional parts
Description
Model
UTY-XWZXZC
UTY-XWZXZB
External connect kit
UTY-XWZXZD
UTY-XWZXZ7
UTY-XWZXZE
Remote sensor
UTY-XSZX
IR receiver unit
UTB-*WC
Drain pump unit
UTZ-PX1NBA
When installing, please refer to the installation manual of each optional part.
1,063 mm
Application
For output function
(Output terminal / CNB01)
For control input function
(Apply voltage terminal / CNA01)
For control input function
(Dry contact terminal / CNA02)
For forced thermostat off function
(Apply voltage terminal / CNA03)
For forced thermostat off function
(Dry contact terminal / CNA04)
Room temperature sensor
For the wireless remote controller.
En-2

Advertisement

Table of Contents
loading

Table of Contents