Figure 10. Remove the thermal module
Screw specifications
M2 x L3
Go to
https://support.lenovo.com/partslookup
part:
Thermal module
Remove the DC-in bracket
Make sure the following FRUs (or CRUs) have been removed.
"Remove the deco cover" on page 30
"Remove the lower case" on page 31
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove one screw then remove the DC-in bracket.
36
Hardware Maintenance Manual
Number of screws
8
to look up the Lenovo part number of the following replacement