Configure Settings At The Computer - Sony VGP-MR100U Quick Start Manual

7 Configure settings at the computer

Configure the connected computer to enable access from with the Network Media Receiver.
For VAIO computers
Start the VAIO Media Setup program installed on your VAIO computer, and make the necessary
settings.
For details on VAIO Media Setup, refer to the VAIO Media help.
For computers other than VAIO
Setup methods vary for different computers. For details on your setup method, refer to the
instruction manuals that came with your computer or with the media content server software you
are using.
Notes
• If a hard disk drive recovery procedure is performed on your computer, returning it to its original
factory configuration, the initial settings described here have to be configured again.
• When using a VAIO computer, you must first install VAIO Media 4.1 or later.
30
VGP-MR100QSG(GB)_2-580-488-11(1)