Sony VGP-MR100U Quick Start Manual page 21

Case 2: Connecting via a hub (system environment B)
Network cable
(not supplied)
To NETWORK
connector
Computer 1
To NETWORK
connector
1
Depending on the respective system connection environment, the connection may be different. For
details, contact the technical support department of your Internet provider.
2 Use a router with built-in hub that supports 100BASE-TX. All the networked equipment must support
100BASE-TX for optimum playback experience.
Notes
• Use a router with a built-in hub (or stand-alone hub) that supports 100BASE-TX.
• Use network cables that support 100BASE-TX.
• The default setting of the Network Media Receiver is "Obtain an IP address automatically (using
router)". Depending on your system environment, this setting may have to be changed. For information
on how to do this, see page 28.
z
Hint
As shown on the previous page and in the illustration above, multiple computers can be connected.
LAN LINE
Network cable
(not supplied)
Computer 2
VGP-MR100QSG(GB)_2-580-488-11(1)
ADSL modem, cable modem, or
similar without router capability
(third-party)
Hub 2 (third-party)
Network cable
(supplied)
To NETWORK
connector
Network Media Receiver
1
21