Sony VGP-MR100U Quick Start Manual page 14

To connect the Network Media Receiver to a TV via a VCR
Make the connection shown below.
To AUDIO/VIDEO
connectors
To connect the Network Media Receiver to a TV with component video
input
Use a component video cable (not supplied) to connect the Network Media Receiver to the
component video input on the TV, as shown below. Insert each plug into the respective connector.
Component video
cable (not supplied)
To COMPONENT
VIDEO OUT connectors
14
To audio/video input
Audio/video cable
(supplied)
l : Signal flow
To component
video input
l : Signal flow
VGP-MR100QSG(GB)_2-580-488-11(1)