Napoleon Entice-1 36 Series Installation And Operation Manual page 15

F.
With the wall mounting bracket installed, have two people lift the appliance up and insert the hooks on the
bracket into the slots on the back of the appliance (Fig. 3-3).
G.
Check the appliance for stability, ensuring the bracket will not pull free from the wall.
H.
Remove the white screw from the bottom of the appliance (Fig. 3-4).
I.
Secure the bottom bracket to the appliance using the white screw previously removed in step H, then
secure the bottom bracket to the wall using the screw supplied (Fig. 3-5).
J.
If desired, install the side cover panels to hide sides of the appliance (Fig. 3-6).
K.
Install media (see "crystal ember installation" section).
L.
Reinstall front glass (see "front glass removal / installation" section).
Wall
Fig. 3-4
C x 8
For illustrative purposes
only. Installation may vary
by model size.
Fig. 3-3
i
ii
A x 1
Repeat on
opposite side.
Side Cover
Panel
Fig. 3-6
installation
EN
Fig. 3-5
15
W415-4155 / - / 05.10.23