Table of Contents
Advertisement
2. Remove the front bezel. See "Front bezel" on page 29.
3. Remove the optical drive, if any. See "Optical drive" on page 30.
4. Remove the hard disk drive, if any. See "Hard disk drive" on page 31.
Removal steps
Remove the M.2 solid-state drive depending on the computer model:
• Type 1
• Type 2
Note: Remove the film that covers the thermal pad (if any) when installing the M.2 solid-state drive.
Coin-cell battery
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
38
neo 50s Gen 3 User Guide
Advertisement
Table of Contents
