Trigger - National Instruments NI PXI-8186 User Manual

Chapter 3 I/O Information

Trigger

NI PXI-8186/8187 User Manual
The TRG connector is the software-controlled trigger connection for
routing PXI triggers to or from the backplane trigger bus.
Figure 3-8 shows the TRG connector location on the NI PXI-8186/8187.
Table 3-8 lists and describes the trigger connector signals.
Figure 3-8. TRG Connector Location and Pinout
Pin
1 TRIG
2 (Shield) GND
NI PXI-8186
Embedded Controller
Table 3-8. TRG Connector Signals
Signal Name
3-10
2
1
Signal Description
Trigger
Ground
ni.com