Clearing And Acknowledging; Using The Local Hmi Help - Hitachi Relion 670 Series Operation Manual

Section 5
Using the HMI
5.1.15

Clearing and acknowledging

The Clear button is used to reset, acknowledge or clear all messages and indications, including LEDs
and latched outputs as well as registers and recordings. Press the Clear button to activate a selection
menu, and select the wanted clearance or reset function. Events and alarms assigned to alarm LEDs are
cleared with the Clear button as well.
1.
Press
GUID-0CFAED62-312B-449F-BB58-D49496EA1CC8 V2 EN-US
Figure 31:
The content of the Clear menu depends on the configuration configured with PCM600.
2.
Select the item to be cleared with
3.
Press
4. Repeat steps 2 and 3 to clear other items.
5.1.16

Using the local HMI help

1.
Press
2.
Scroll the text with
3.
To close the help, press
The help dialog is also closed when the display timeout expires.
48
Pressing Cancel in the Save changes dialog closes only the Save changes dialog box, but the
IED remains in editing mode. All the changes applied to any setting are not lost and the user
can continue to change settings. To leave the change setting mode, select No or Yes in the
Save changes dialog.
After changing the parameters marked with !, the IED restarts automatically for the changes
to take effect.
to activate the Clear view.
Clear view
, select OK to confirm the selection or Cancel to cancel the selection, and press
to open the help view.
or if the help text exceeds the display area.
.
© 2017 - 2023 Hitachi Energy. All rights reserved
IEC13000236-1-en.vsd
or .
1MRK500127-UUS Rev. M
AMU0600425 v10
.
AMU0600421 v8
670 series
Operation manual