Craftsman 115 Operator's Manual page 13

ADJUSTABLE TORQUE CLUTCH
The drill ls equipped with an adjustable torque clutch for
driving different types of screws into differentmaterials.
The proper setting depends on the type of material and
the size of sorew you are using.
ADJUSTING TORQUE
See Ftgure 6.
• There are Lwenty-fourtorque indicatorsettings located
on the _TO_ofthe drill.
• Rotate the adjusting ring to the desired setting.
• 1 - 4 For drivingsmed[ s crews
• 5 - 8 For drivingscrews into soft
materia_
• g - 12 For ddving screws into soft and hard
materials
• 13 - 16 For drivingscrews into hardwood
=17 - 23 For driving large screws
• 4U For heavy drifting
TODECREASE ADJUSTING
TORQUE R/NO
LED WORKLIGHT
See F/gum 7.
The LED workJighton the foot of the drillwill come on
when the switch _'igger ie depressed.This providesaddi-
tional lightingon the surface of the workpieoefor opera-
Lion in lower-lightareas.
LED
WORKLIGHT
Fig. 7
Bff STORAGE
See Figure 8.
When not in use, bits providedwith the drill can be placed
in t_e storage area located on the base of the driU.
TOIXCREASE
TORQUE _,
Fig. 6
SCREWDRIVER BIT(S)
\
BIT
AREA
13