VTech ES2000 Manual page 12

Make, answer or end a
call
Predial a call
1. Enter the telephone number.
• Press to make corrections.
2. Press to dial.
Direct memory dial
• When the phone is not in use, press
and hold a direct memory key 1, 2
or 3 if you have previously saved the
numbers for quick dial (See Direct
memory).
Answer a call
• Press , or
• Lift the handset to answer if AUTO
ANSWER is on.
End a call
• Press or place the handset in the
handset charger.
Turn the handset ringer on/
off
• Press and hold .
Turn the keypad lock on/off
• Press and hold .
Share call
You can use two cordless handsets at a
time on an outside call.
To make a 3-way conversation
1. Press on the handset during a
call.
2. Press ▼/▲ to select INTERCOM.
3. Press to answer call on desination
handset.
4. Press and hold on the initiating
handset.
• CONFERENCE displays.
Adjust listening volume
To adjust the listening volume on a
cordless handset
• During a call, press ▼/▲.
NOTES
• The handset and speakerphone
volume settings are independent.
• When the volume reaches the
minimum or maximum setting, you
hear two beeps.
22
Call waiting
When you subscribe to call waiting
service with your telephone service
provider, you hear an alert tone if there
is an incoming call while you are on
another call.
• Press to put the current call on
hold and take the new call.
• Press at any time to switch back
and forth between calls.
If you also subscribe to caller ID service, it
will let you see the name and telephone
number of the caller during call waiting.
It may be necessary to change your
telephone service to use this feature.
Contact your telephone service provider
if:
• You have both caller ID and call
waiting, but as separate service
(you may need to combine these
service);
• You have only caller ID service, or
only call waiting service; or
• You do not subscribe to caller ID or
call waiting services.
There are fees for caller ID services. In
addition, services may not be available
in all areas.
Redial list
Review a redial list entry
1. Press to enter the redial list.
2. Press ▼/▲repeatedly to browse
until the desired entry displays.
NOTE
• You hear a double beep when you
reach the beginning or end of the
redial list.
Store a redial number into
the phonebook
1. Press to enter the redial list.
2. Press ▼/▲ repeatedly to browse
until the desired entry displays.
and then press ▼/▲ to
3. Press
select ADD TO PB.
4. Press to enter name.
5. Press to enter number.
and then press ▼/▲ to
6. Press
select MELODY 1 to MELODY 10.
7. Press to confirm.
23