Advertisement
12
Checking the Access Point LEDs
Access Point Status LEDs
The location of the access point status LED is shown in
Regarding LED status colors, it is expected that there will be small variations in color intensity
Note
and hue from unit to unit. This is within the normal range of the LED manufacturer's
specifications and is not a defect.
The access point status LED indicates various conditions and are described in
Table 2
LED Status Indications
Message
Type
Association status
Boot loader status
Boot loader error
Operating status
Access point operating
system errors
24
LED State
Chirping Green
Green
Green
Red
Blinking amber
Cycling through green,
red, and amber
Rapidly cycling
through red, green,
amber, and off.
Cycling through red,
green, amber, and off
Figure
2.
Message
Meaning
Normal operating condition, but no wireless
client associated
Normal operating condition, at least one wireless
client association
Executing boot loader
Boot loader signing verification failure
Software upgrade in progress
Discovery/join process in progress
Access point location command invoked from
controller web interface.
General warning; insufficient inline power
Table
2.
Advertisement
