Bosch Professional GSR 14,4 V Operating Instructions Manual page 8

OBJ_BUCH-720-001.book Page 8 Monday, May 5, 2008 8:55 AM
8 | English
Hold the power tool only by the insulated
gripping surfaces, when performing an oper-
ation where the cutting tool may run into
hidden wiring. Contact with a "live" wire will
make exposed metal parts of the tool "live"
and shock the operator.
Hold the power tool with a firm grip. High re-
action torque can briefly occur while driving in
and loosening screws.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the power tool has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Avoid unintentional switching on. Ensure the
On/Off switch is in the off position before in-
serting battery pack. Carrying the power tool
with your finger on the On/Off switch or in-
serting the battery pack into power tools that
have the switch on invites accidents.
Do not open the battery. Danger of short-cir-
cuiting.
Protect the battery against heat, e.g., al-
so against continuous sun irradiation and
fire. There is danger of explosion.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the tool and leave it open.
Intended Use
The tool is intended for driving in and loosening
screws as well as for drilling in wood, metal, ce-
ramic and plastic.
1 609 929 R34 | (5.5.08)
Product Features
The numbering of the product features refers to
the illustration of the power tool on the graphics
page.
1 Keyless chuck
2 Torque preselection ring
3 Gear selection lever
4 Screwdriver bit*
5 Battery release button
6 Battery*
7 Rotational direction switch
8 On/Off switch
9 Universal bit holder*
10 Securing screw for keyless chuck
11 Hex key**
*The accessories illustrated or described are not in-
cluded as standard delivery.
**Commercially available (not included in the delivery
scope)
Bosch Power Tools