Advertisement
Installation Guide: Nokia 7210 MIDP SDK 1.0
16-12-02
Note. If you are using an IBM T2x-series laptop and Windows 2000, you may need to modify your hardware
acceleration settings. If the Nokia Developer's Suite for J2ME
desktop and select Properties. Select Settings | Advanced | Troubleshooting and set hardware acceleration to
"Disable all but basic accelerations" (see Figure 1). This problem has been identified at least with IBM laptop
models T20 and T21.
Figure 1. Hardware acceleration settings window.
4 INSTALLATION STEPS
Before downloading the software, you must either log in as a Forum Nokia member or register (free of charge)
at Forum Nokia. If you have received the software to be installed in some other way and have not yet registered
as a Forum Nokia member, you should register before or during the installation procedure.
During the installation, you can submit your current Forum Nokia username and password, and the
corresponding serial number for the product will then be sent to the e-mail address specified in your Forum
Nokia account. The product serial number can also be retrieved from the Tools and SDK section at
www.forum.nokia.com.
Note. If you already have a Forum Nokia account and have received the serial number, installation can be done
without a network connection.
Copyright © 2002 Nokia Corporation. All rights reserved.
TM
install process fails, right-click on Windows
4
Advertisement
