Number Of Times Data Clear Is Repeated; Number Of Times Power Up Auto Clear Program Is Repeated; Number Of Times Auto Clear At Job End Program Is Repeated - Sharp MX-FR36U Operation Manual

Security settings
■ Number of Times Data Clear is Repeated/Number of Times
Power Up Auto Clear Program is Repeated/Number of Times
Auto Clear at Job End Program is Repeated
To further strengthen the security settings, you can have data clearing repeated a set
number of times in each area.
Tap the select box
clearing to be repeated. When finished, tap the [Submit] key.
●

Number of Times Data Clear is Repeated

The number of times data clearing is repeated when "Clear All Memory", "Clear
Document Filing Data", "Clear All Data in Jobs Completed List", or "Clear Address
Book and Registered Data" is executed can be set to any number from 1 to 7. The
factory setting is 1.

Number of Times Power Up Auto Clear Program is Repeated

●
The number of times "Power Up Auto Clear" is repeated can be set to any number
from 1 to 7. The factory setting is 1.
This setting is only enabled when the [Power Up Auto Clear] checkbox is
selected.
●

Number of Times Auto Clear at Job End Program is Repeated

The number of times auto clear is repeated after each job is completed can be set to
any number from 1 to 7. The factory setting is 1.
About the repeat setting
When the repeat setting (number of repetitions) is increased to enhance the security
function, the time required for data clearing increases.
It is recommended that you select repeat settings for "Number of Times Data Clear is
Repeated", "Number of Times Power Up Auto Clear Program is Repeated", and
"Number of Times Auto Clear at Job End Program is Repeated" that are suitable for
your security needs and conditions of use.
16
of each item and select the number of times that you wish data
Get other manuals https://www.bkmanuals.com