Technical Information; Possible Installation Options; Conformity / Manufacturer's Declaration; Imprint - Loewe bild 7.77 Operating Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 10
Loewe bild 7
Operating manual 2
Technical information / Possible installation options
Conformity / Manufacturer's declaration / Imprint

Technical information

About the OLED screen
The TV set with OLED screen you have purchased satisfies the most
rigorous quality requirements and has been inspected with respect
to pixel errors.
Despite of thorough care when manufacturing the display, it cannot
be 100% guaranteed that no subpixel defects will occur due to tech-
nical reasons.
Please understand that these types of effects, as long as they are
within the limits specified in the standard, cannot be considered as a
device defect in terms of the guarantee.
Organic Light Emitting Diodes are an image technology based on
self-luminous pixels that offer clear benefits in terms of image quality
and performance.
Under certain conditions, persistent, one-sided loads on the OLED
material can result in persistence image faults which are irreversible.
Residual image issues can arise by using static image content over a
longer period, such as static images, subtitles or ticker displays, loop-
ing dia-shows or video sequences, static displays serving as presenta-
tion monitors or with video games, black bars in some screen formats.
These residual image issues are not defects within the meaning of
the warranty.
To minimise such issues, Loewe has developed a special algorithm
for detecting image content.
If static images are displayed for too long, the TV set automatically
switches to a screen-friendly contrast mode. After a new user oper-
ation, the device immediately returns to its normal state. In addition,
menu insertions are gradually reduced or displayed transparently
after one minute.
Under normal viewing conditions, such residual image issues do not
arise.
Instructions on the built-in / connected hard drive
Switching off the TV set with the mains switch during operation or
an inadvertent disruption to the power supply (e.g., power failure)
can cause damage to the hard disk file system and hence loss of the
recorded broadcasts.
Never ever disconnect the USB storage device from the TV set during
a copy process. Before switching off the set with the mains switch, we
recommend you to switch it to standby mode.
If, contrary to expectation, you are still experiencing problems with the
operation of the hard drive, you can first carry out a test. In addition,
a formatting of the hard disk can be remedy. In the process, however,
all content on the hard disk is deleted. You can find the corresponding
menu items under System settings → Control → more ... → Hard
disks.
Loewe are not liable for the loss of data on the integrated hard disk
of your TV set. To avoid data loss, we recommend copying important
recordings to an external storage medium.
Notes on Kinematics
The Loewe TV set is equipped with a kinematics that moves the TV
set upwards or downwards when switching it on and off, whereby the
speaker cover is visible or is hidden.
Please make sure that there is no externally applied force opposing the
movement. You have the option to fix the position of the kinematics
from the menu, or disable the function.
36959000_OM2_bild_7_55-77_3_00_ML_Buch.indb 17
36959000_OM2_bild_7_55-77_3_00_ML_Buch.indb 17

Possible installation options

You can use the following Loewe installation options listed for your
TV set.
Do not use any installation options that are not approved for your
TV set.
TV set
Item number/name of the installation option:
bild 7.77
72925x00
TSM 7.77
72655x00
FSM 7.65-77
72600x00
WMF 7
---
WM 7
bild 7.65
72665x00
TSM 7.65
72710x00
TS 7.65
72655x00
FSM 7.65-77
72600x00
WMF 7
---
WM 7
bild 7.55
72620x00
TSM 7.55
72710x00
TS 7.55
72630x00
FSM 7.55
72600x00
WMF 7
---
WM 7

Conformity / Manufacturer's declaration

Loewe Technology hereby declares that this product
meets
the
essential
relevant provisions of Directive 2014/53/EU and all
applicable EU directives.
In France and Italy it may only be used indoors.
You can find the complete declaration of conformity in the product
selection at:
www.loewe.tv/int/support

Imprint

Loewe Technology GmbH
Printed in Germany
Editorial date 02/20 - 4.0 SB ©
Industriestraße 11
Loewe Technology GmbH, Kronach
D-96317 Kronach
www.loewe.tv
The information in this document is subject to change without
notice and does not constitute any obligation on the part of
Loewe Technology GmbH.
All rights including translation, technical modifications and errors
reserved.
requirements
and
other
17
09.01.2019 14:30:19
09.01.2019 14:30:19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bild 7Bild 7.65Bild 7.55

Table of Contents