Charging The Reader; About Charging - Sony PRS-700 User Manual

Charging the Reader

About charging

Charging the Reader is required when using for the first time
or when the remaining battery power is running low. Turn on
the Reader, and then charge in one of the following two ways.
 Connect to a computer via USB (Refer to the Quick Start Guide
and page 9).
(Charging time: approx. 4 hours*)
 Connect to an AC outlet using the AC Adaptor for Reader (AC-
S5220E) (optional).
(Charging time: approx. 2.5 hours*)
* Approximate time required to fully charge the battery.
Notes
 When you connect the Reader to your computer,
connection via USB) is displayed on the Reader's screen. If the
battery has been fully depleted, it takes approximately 5 minutes
until is displayed, during which time you will not be able to turn
on the Reader by the POWER switch. In this case, wait until
displayed.
The charge indicator lights up in red while
while the Reader is charging.
 If the remaining battery power of a connected notebook computer
is low, charging via USB connection may not be possible.
 If you connect the Reader to a notebook computer which is not
connected to an AC outlet, the battery of the notebook computer
will be consumed. Do not leave the Reader connected to a
notebook computer which is not connected to an AC outlet for an
extended period.
 Connecting the Reader via a USB hub or extension cable may not
work and is not supported. Connect the USB cable directly to the
computer.
(indicating
is not displayed,
Continued
is
21
US