Advertisement
Quick Links
U P
C
®
Models/Modelos/Modèles
T2740 & T4740
Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
1/8" (3.17mm)
For easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To complete the deck and valve rough-in prior to
installing this trim kit.
Para instalación fácil de su llave Delta
usted necesitará:
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Para completar el borde y la instalación de
válvulas dentro de las paredes previa a la
instalación de la llave y sus accesorios.
Pour installer votre robinet Delta
facilement, vous devez:
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Installez le corps du robinet et terminez le
pourtour du bain avant de poser les accessories
de finition.
3/32"
(2.38mm)
?
US. Pat. 3,645,493, 3,786,995, 4,523,604, 4,562,960, 4,593,430, 4,218,785, 4,577,653, 4,765,365
1
3/32" (2.38mm)
1/8" (3.17mm)
2/7/06
Rev. A
Advertisement
Related Manuals for Delta T4740 Series
Summary of Contents for Delta T4740 Series
- Page 1 • To READ ALL warnings, care, and maintenance information. 1/8" (3.17mm) • To complete the deck and valve rough-in prior to installing this trim kit. Para instalación fácil de su llave Delta usted necesitará: • LEER TODAS las instrucciones completamente antes de empezar. 3/32"...
- Page 2 MAKE ANY OTHER WARRANTY OF ANY KIND, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use & service. Replacement This warranty excludes all industrial, commercial &...
- Page 3 Model / Modelo / Modèle T2740 Model / Modelo / Modèle T4740 RP42577▲ RP42583▲ Spout Assembly Spout Assembly Ensamble del Tubo de Salida Ensamble del Tubo de Salida RP42580▲ Lift Rod Assembly Ensamble de la barrita de alzar Tirette RP18395 Set Screw Tornillo de Presión...
-
Page 4: Maintenance
T4740 RP40668 Diverter Assembly Ensamble del Desviador Dérivation Maintenance If faucet leaks from spout outlet–Shut off water supplies– Model T4740 Replace Seats and Springs (1). * If faucet does not divert water from the spout to the hand shower, check that If leak persists–Shut off water supplies–... - Page 5 T2740 T4740 NOTE: The deck and valve rough-in must be finished before Screw bases (1) with gaskets (2) over end valves (3). OPTION: Use installing the trim kit. silicone under the gasket if deck is uneven. Install spout (4) on adapter (5).
- Page 6 For Model T4740 Only Slide hose (1) through conical nut (2). Attach hose (1) to braided Install lift rod (1). Screw the lift rod until it drops down and metal hose (3) using gasket (4) and tighten. DO NOT install hand rotates freely.
- Page 7 T4740 Model T2740 Install handles. Be sure glide ring (1) is properly seated in Remove spout tip and gasket (1). Turn faucet handles (2) all the way on. bottom of handle before installing. If either handle does not Turn on hot and cold water supplies and flush water lines for one minute. rotate in the correct direction, do the following: Important: This flushes away any debris that could cause damage to 1.
- Page 8 T4740 T4740 Pull hose (1) to its farthest extension and point it down into the Attach hand piece (1) to hose (2) with gasket (3) between tub. Pull the lift rod (2) up to the full on position and flush water connection.