Remove Blower Pipes - Echo PB-2520 Operator's Manual

PB-2520
3. Align tabs (C) with grooves (D)
and slide straight blower pipe
(E) over curved pipe (F) until
there is light resistance. Do not
force the connection.
4. Hold curved pipe, and turn
straight pipe clockwise,
engaging positive locking
channels until connection is
firm.
Note: Blower use will eventually loosen pipe connections. Exclusive
positive locking system allows pipes to be tightened. If
loosening occurs, remove straight pipe, and reinstall
according to instructions 3 and 4.

Remove Blower Pipes

1. Insert screwdriver into hole (G)
to release pipe lock.
2. Pull pipe out of fan case.
3. Remove screwdriver.
X7501190003
©10/2019 ECHO Inc.
F
E
D
ASSEMBLY
C
G
17