Initial Start-Up - Bosch SMI88TS06C Instruction Manual

Initial start-up

When the dishwasher is switched on for
the first time, you are taken directly to
the settings for the initial start-up.
If you select Home Connect
Note:
during the initial start-up, make further
settings via your dishwasher App.
Observe the supplied Home Connect
documents.
On the display window at the top @
the following text appears for manual
selection:
Initial start-up settings
Language
Home Connect
Time format
Time setting
Water hardness
Rinse aid disp.
Water connection *
* depending on the features of your dishwasher
--------
Factory setting
Deutsch
Manual/Home Connect
24 h
12:00
°E 16 - 20 medium
Level 5
Cold water
Getting to know your appliance en
Scroll with < >
Set with - +
Leave with Setup 3 sec.
The required settings for the initial
start-up are listed in the table below.
To change the setting:
Keep pressing button > )R until the
1.
required setting is displayed.
Change the setting with setting
buttons + - `.
Press and hold the Info button {
2.
8 for 3 seconds.
The chosen setting has now been
stored.
Infotext
by pressing Info button {
Language selection.
Manual/Home Connect.
12h or 24h.
Set the current time.
Adjustment to the local water hardness.
When using Multitabs, select the lowest
setting.
Amount of rinse aid affects drying. When
using Multitabs, select setting 0.
Connection to hot water (40-60°C) or cold
water (<40°C) possible.
13