Philips HQ7617 Manual page 8

ENGLISH
10
C
2
1
C
C
1 Remove the powerplug from the socket
and pull the appliance plug out of the
shaver.
2 Let the shaver run until it stops, open the
trimmer, undo the screws and open the
shaver.
3 Remove the batteries.
Do not connect the shaver to the mains again
after the batteries have been removed.
Troubleshooting
1 Reduced shaving performance
Cause 1: the shaving heads are dirty.
B
The shaver has not been rinsed long enough or
B
the water used was not hot enough.
Clean the shaver thoroughly before you
continue shaving (see 'Cleaning').
Cause 2: long hairs are obstructing the shaving
B
heads.
Turn the wheel anti-clockwise (1) and remove
the retaining frame (2).
Clean the cutters and guards.
Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may