This submenu allows you to change voltage and clock of various devices.
Note
» We suggest you use the default setting. Changing the voltage and clock improperly may damage the
device.
» The options and default settings might be different by RAM or CPU models.
» Beware of that setting inappropriate values in items of this menu may cause system to malfunction.
- Values in Red: Danger
- Values in Yellow: Warning
- Values in White: Normal
Start Page
You can set the entrance page when you enter UEFI BIOS Setup.
Options: Page – Main (Default) / Page – Advanced / Page – Chipset / Page – Boot / Page – Security
/ Page –O.N.E / Page – Save & Exit
Clock Frequency
This item specifies new frequency to be applied. Frequency is rounded to nearest valid value.
Allowed range is limited by the Max / Min supported frequencies. Changes are not applied until
settings are saved and platform saved and platform resets.
Options: 100.00 (Default)
Spread %
This item specifies the amount of spread spectrum clocking to be applied to the base clock
frequency in 0.01% increments. Allowed range is limited by Maximum Spread % and supported
Spread mode Adjustements. If changes allowed, a value between 0 and Max.
Options: 24 (Default)
CPU Ratio Mode
This item sets CPU Ratio Mode.
Options: Auto (Default) / ALL Cores / Per Core / Fixed
28 | 6. O.N.E Menu
6� O�N�E Menu