Biostar Z490T-SILVER Manual page 27

Vivid LED DJ
Vivid LED DJ can adjust your color scheme of ARMOR GEAR, RGB LED Device.
1. LED COMMANDER: Allows you to select the LED mode.
• Default : Default LED illuminations. (Blue light)
• RAZER : Allows you to connect to the RAZER app to sync the motherboard lights.
» When using RAZER mode, turn off RACING GT Software and LED illumination will return to the
default state.
» RAZER mode is to achieve LED illumination synchronization through the connection with RAZER
software.
» RAZER software must be installed to use RAZER mode. RAZER ICON will appear after the software is
installed.
» When using RAZER mode, it must be used with RAZER related devices and peripheral devices.
» RAZER related information please go to RAZER official website download.
• RGB Sync : Allows you to synchronize the LED Type item settings.
2. LED Type: Select the LED lighting blocks.
• System : System LED illuminations. (Racing ARMOR)
• 12V LED : The 12V LED illumination. (12V_LED Device)
• 5V LED : The 5V LED illumination. (5V_LED Device)
• Memory Sync : The RGB Audio LED illumination. (Memory LED)
3. ON/OFF: To enable or disable VIVID LED function.
4. ON/OFF: Allows you to enable or disable LED of a single item.
5. Color Palette: Allows to you choose specific color of the LEDs.
6. LED Brightness Bar: Allows you to adjust the LED brightness.
7. Auto: LEDs will Automatically change the Color Palette and LED Brightness.
» If you select Auto mode, the Color Pallette and LED Brightness Bar will disabled.
Chapter 3: UEFI BIOS & Software | 27
Z490T-SILVER