Biostar Z270GT6 User Manual
Hide thumbs Also See for Z270GT6:

Advertisement

Quick Links

BIOS User Guide
Z270GT6
BIOS Update ������������������������������������������������������������������������������������� 2
UEFI BIOS Setup �������������������������������������������������������������������������������� 6
1� Main Menu ����������������������������������������������������������������������������������� 7
2� Advanced Menu ���������������������������������������������������������������������������� 8
3� Chipset Menu �������������������������������������������������������������������������������17
4� Boot Menu �����������������������������������������������������������������������������������21
5� Security Menu ������������������������������������������������������������������������������24
6� O�N�E Menu����������������������������������������������������������������������������������27
7� Exit Menu�������������������������������������������������������������������������������������37

Advertisement

Table of Contents
loading

Summary of Contents for Biostar Z270GT6

  • Page 1: Table Of Contents

    BIOS User Guide Z270GT6 BIOS Update ������������������������������������������������������������������������������������� 2 UEFI BIOS Setup �������������������������������������������������������������������������������� 6 1� Main Menu ����������������������������������������������������������������������������������� 7 2� Advanced Menu ���������������������������������������������������������������������������� 8 3� Chipset Menu �������������������������������������������������������������������������������17 4� Boot Menu �����������������������������������������������������������������������������������21 5� Security Menu ������������������������������������������������������������������������������24 6� O�N�E Menu����������������������������������������������������������������������������������27 7� Exit Menu�������������������������������������������������������������������������������������37...
  • Page 2: Bios Update

    The BIOS can be updated using either of the following utilities: •  BIOSTAR BIOS-FLASHER: Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a CD-ROM.
  • Page 3 Z270GT6 7. A dialog pops out after BIOS flash is completed, asking you to restart the system. Press the <Y> key to restart system. 8. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS setup.
  • Page 4 Then, the BIOS Update is completed. BIOS Update Utility (through a BIOS file) 1. Installing BIOS Update Utility from the DVD Driver. 2. Download the proper BIOS from http://www.biostar.com.tw/ 3. Launch BIOS Update Utility and click the “Update BIOS” button on the main screen.
  • Page 5 Z270GT6 6. After the BIOS Update process is finished, click on “OK” to reboot the system. 7. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS setup. After entering the BIOS setup, please go to the <Save & Exit>, using the <Restore Defaults>...
  • Page 6: Uefi Bios Setup

    UEFI BIOS Setup Introduction The purpose of this manual is to describe the settings in the AMI UEFI BIOS Setup program on this motherboard. The Setup program allows users to modify the basic system configuration and save these settings to NVRAM. UEFI BIOS determines what a computer can do without accessing programs from a disk.
  • Page 7: 1� Main Menu

    Z270GT6 1� Main Menu Once you enter AMI UEFI BIOS Setup Utility, the Main Menu will appear on the screen providing an overview of the basic system information. BIOS Information It shows system information including UEFI BIOS version, Project Code, Model Name, Build Date and etc.
  • Page 8: 2� Advanced Menu

    2� Advanced Menu The Advanced Menu allows you to configure the settings of CPU, Super I/O, Power Management, and other system devices. Note   » Beware of that setting inappropriate values in items of this menu may cause system to malfunction. ACPI Settings Enable ACPI Auto Configuration This item enables or disables BIOS ACPI auto configuration function.
  • Page 9 Z270GT6 Enable Hibernation This item enables or disables system ability to hibernate (0S/S4 sleep state). This option may not be effective with some 0Ss. Options: Enabled (Default) / Disabled ACPI Sleep State This item selects the highest ACPI sleep state the system will enter when the SUSPEND button is pressed.
  • Page 10 SMART FAN Control CPU Smart FAN1/2 & System Smart FAN1/2/3 This item allows you to control the CPU/System Smart Fan function. Options: Disabled (Default) / Auto Note   » The following items appear only when you set the Smart Fan function to [Auto]. CPU Fan Calibrate Press [ENTER] to calibrate CPU Fan speed.
  • Page 11 Z270GT6 H/W Monitor Shutdown Temperature This item allows you to set up the CPU shutdown Temperature. Options: Disabled (Default) / 70°C/158°F / 75°C/167°F / 80°C/176°F / 85°C/185°F / 90°C/194°F Network Stack Configuration Network Stack This item enables or disables UEFI network stack...
  • Page 12 IPv4 PXE Support This item enables or disables IPv4 PXE Boot Support. If disabled IPv4 PXE boot option will not be created. Options: Disabled (Default) / Enabled IPv4 HTTP Support This item enables or disables IPv4 HTTP Boot Support. If disabled IPV4 HTTP boot option will not be created.
  • Page 13 Z270GT6 Offboard PCIe SATA Controller USB Configuration Legacy USB Support The item allows you to enable Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications.
  • Page 14 USB Mass Storage Driver Support The item allows you to enable or disable USB Mass Storage Driver Support. Options: Enabled (Default) / Disabled Port 60/64 Emulation The item allows you to enable or disable I/O port 60h/64h emulation support. This should be enabled for the complete USB keyboard legacy support for non-USB aware OSes.
  • Page 15 Z270GT6 CPU Configuration This item shows CPU Information C6DRAM This item enables or disables moving of DRAM contents to PRM memory when CPU is in C6 state. Options: Disabled (Default) / Enabled Overclocking Lock This item enables or disables Overclocking Lock (BIT 20) in FLEX_RATIO(194) MSR.
  • Page 16 SATA and RST Configuration The BIOS will automatically detect the presence of SATA devices. There is a sub-menu for each SATA device. Select a device and press <Enter> to enter the sub-menu for detailed options. SATA Controller(s) This item enables/disables Serial ATA Device. Options: Enabled (Default) / Disabled SATA Mode Selection This item determines how SATA controller(s) operate.
  • Page 17: 3� Chipset Menu

    Z270GT6 3� Chipset Menu This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of the CPU itself uses when communicating with its own special components.
  • Page 18 Onboard LAN1 Option ROM This item enables/disables Onboard LAN1 Option ROM. Options: Disabled (Default) / Enabled PCH-IO Configuration PCI Express Configuration PEX1_1 / PEX1_2 / PEX1_3 / PEX1_4 / PEX16_SB_1 / PEX16_SB_2 Options: Auto(Default) / Gen1 / Gen2 / Gen3 HD Audio Control Detection of the HD-Audio device.
  • Page 19 Z270GT6 EuP Control When EuP is enabled, the system will meet EuP requirement. Options: Disabled (Default) / Enabled in S4-S5 System Agent (SA) Configuration Internal Graphics This item keeps IGFX enabled based on the setup options. Options: Auto (Default) / Enabled / Disabled...
  • Page 20 PAVP Enable This item enables or disables PAVP. Options: Enabled (Default) / Disabled Max TOLUD Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automatically based on largest MMIO length of installed graphic controller. Options: Dynamic (Default) / 1 GB / 1.25 GB / 1.5 GB / 1.75 GB / 2 GB / 2.25 GB / 2.5 GB / 2.75 GB / 3 GB / 3.25 GB / 3.5GB VT-d This item enables or disables VT-d capability.
  • Page 21: 4� Boot Menu

    Z270GT6 4� Boot Menu This menu allows you to setup the system boot options. Setup Prompt Timeout This item sets number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Options: 1 (Default) Bootup NumLock State This item selects the keyboard NumLock state.
  • Page 22 SATA Support Options: All Sata Devices (Default) / Last Boot HDD Only VGA Support If Auto, only install Legacy OpRom with Legacy OS and logo would NOT be shown during post. EFI driver will still installed with EFI OS. Options: EFI Driver (Default) / Auto USB Support If Disabled, all USB devices will NOT be available until after OS boot.
  • Page 23 Z270GT6 Video This option controls the execution of UEFI and Legacy Video OpROM Options: Legacy (Default) / UEFI / Do not launch Other PCI device Determines OpROM execution policy for devices other than Network, Storage, or Video. Options: UEFI (Default) / Legacy / Do not launch New Boot Option Policy It controls the placement of newly detected UEFI boot options.
  • Page 24: 5� Security Menu

    5� Security Menu Administrator Password This item sets Administrator Password. User Password This item sets User Password. Secure Boot Menu 24 | 5. Security Menu...
  • Page 25 Z270GT6 Attempt Secure Boot Secure Boot activated when Platform Key(PK) is enrolled, System mode is User/Deployed, and CSM function is disabled. Options: Disabled (Default) / Enabled Secure Boot Mode Secure Boot mode selector : Standard/Custom. In Custom mode Secure Boot Variables can be configured without authentication.
  • Page 26 Authorized Signatures Save Key to File – Allows you save key to DB file. Set new Key – Allows you set new DB file. Append Key – Allows you append Var to DB. Erase Key – Allows you erase DB file. Forbidden Signatures Save Key to File –...
  • Page 27: 6� O�N�E Menu

    Z270GT6 6� O�N�E Menu This submenu allows you to change voltage and clock of various devices. Note   » We suggest you use the default setting. Changing the voltage and clock improperly may damage the device.   » The options and default settings might be different by RAM or CPU models.
  • Page 28 CPU Ratio Mode This item sets CPU Ratio Mode. Options: Auto (Default) / All Cores / Per Core / Fixed Note   » The following items appear only when you set the CPU Ratio Mode function to [All Cores & Fixed] Core Max OC Ratio This item sets the maximum OC Ratio for the CPU Core and Ring.
  • Page 29 Z270GT6 Memory Timing Configuration This item allows you to select CAS Latency, 0: AUTO, max: 31 Options: Auto (Default) tRCD/tRP This item allows you to select RAS to CAS delay time and Row Prechrge delay time, 0: AUTO, max: 63...
  • Page 30 This item allows you to select Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, 20, 24 Options: Auto (Default) tRRD_S This item allows you to select Min Row Active to Row Active Delay Time, Different Bank Group, 0: AUTO, max: 10 Options: Auto (Default) tRRD_L...
  • Page 31 Z270GT6 Read ODT Training* Read On-Die Termination Training Options: Disabled (Default) / Enabled Turn Around Timing Training Turn Around Timing Training Options: Disabled (Default) / Enabled Voltage Configuration CPU Load-Line Calibration This item adjust CPU LLC function. Options: Enabled (Default) / Disabled CPU Vcore Over Voltage This item sets CPU Vcore Over Voltage.
  • Page 32 CPU GT Over Voltage This item sets CPU GT Over Voltage. Options: Auto (Default) / Override / Adaptive Note   » The following items appear only when you set the CPU GT Over Voltage to [Override] CPU GT Adjust Voltage Options: 0.800V (Default), Range: 0.600V-1.500V Note  ...
  • Page 33 Z270GT6 CPU Power Management Intel(R) SpeedStep(tm) This item allows more than two frequency ranges to be supported. Options: Enabled (Default) / Disabled Power Limit 1 Override This item enables or disables Power Limit 1 override. If this option is disabled, BIOS will program the default values for Power Limit 1 and Power Limit 1 Time Window.
  • Page 34 Enhanced C-states This item enables or disables C1E. When enabled, CPU will switch to minimum speed when all cores enter C-State. Options: Enabled (Default) / Disabled C-states Auto Demotion This item sets C-State Auto Demotion. Options: C1 and C3 (Default) / C1 / C3/ Disabled C-states Un-demotion This item sets C-State Un-demotion.
  • Page 35 Z270GT6 Memory Insight DIMM Profile These items display memory information. 6. O.N.E Menu | 35...
  • Page 36 Vivid LED Control On/Off This item Vivid LED Control Switch. Options: Enabled (Default) / Disabled Color Wheel This item Vivid LED Color Wheel. Options: Disabled (Default) / Enabled Sparkle Mode This item Vivid LED Sparkle Mode. Options: Permanent (Default) / Shine / Breathe This item allows you to adjust the value for RED color model.
  • Page 37: 7� Exit Menu

    Z270GT6 7� Exit Menu This menu allows you to load the optimal default settings, and save or discard the changes to the BIOS items. Discard Changes and Exit Abandon all changes made during the current session and exit setup. Save Changes and Reset Reset the system after saving the changes.

Table of Contents