Sony VAIO Digital Studio VGC-RA930G Series Quick Start Manual page 75

Connecting a device with a stereo A/V dubbing cable
1 Connect a stereo A/V dubbing cable with triple RCA plugs at each end
(optional) directly into the composite video port, composite audio L and R
jacks, located on either the front or back panel of your computer.
2 Connect the other ends of the stereo A/V dubbing cable into the appropriate
jacks on your compatible VCR or camcorder.
Connecting a TV monitor (display)
1 Connect the video connector end of the video cable adapter (optional) to the
TV Out (S-video/video) jack on the back panel of your computer.
2 Connect the jack end of the video cable adapter to either end of a video cable
(optional). Connect the other end of the video cable to the Video-In jack on
your TV monitor or display, located on either the side or back of your TV
monitor/display.
3 Connect the single-jack end of an audio cable (optional) to the Headphones
jack located on the front or back panel of your computer. Connect the
double-jack end of the audio cable to the Audio-In (L/R) on your TV
monitor or display. (The Audio-In jacks may be located on the side or rear of
your TV monitor/display.)
Connecting a TV monitor or display
✍
The video cable adapter is not necessary, if you use an S-video cable to connect your
TV to the computer's TV out (S-video/video) jack.
Video cable adapter
(optional)
Connecting Other Devices
Video cable
(optional)
Audio cable
(optional)
75