About The I.link Port - Sony VAIO Digital Studio VGC-RA930G Series Quick Start Manual

About the i.LINK Port

Your VAIO® computer is equipped with a 4-pin and a 6-pin i.LINK® port. A 4-
pin i.LINK port cannot supply power to a connected i.LINK device. A 6-pin
i.LINK port can supply power (10V to 12V) to a connected i.LINK device, if the
device is equipped with a 6-pin connector.
The total power supplied by the 6-pin i.LINK port does not exceed 6 watts.
Connecting an i.LINK (IEEE 1394) device
1 Use the symbol to locate the i.LINK port on your compatible i.LINK
device and on your computer. Plug the i.LINK cable connector into this port.
2 Plug the other end of the cable into the corresponding 4- or 6-pin i.LINK
port on your computer.
✍
See the instructions supplied with your i.LINK device for more information on
installation and use.
About the i.LINK Port
39