Connecting The Wireless Mouse - Sony VAIO Digital Studio VGC-RA930G Series Quick Start Manual

Connecting the Wireless Mouse

Your VAIO® computer is supplied with a wireless mouse. Before attempting to
use the wireless mouse, you must enable communication between the computer
and the mouse. To connect your wireless mouse, it must be within 11 inches of
the computer.
✍
When attempting to connect the wireless mouse, confirm that the AA batteries
(supplied) are properly inserted into the mouse before your computer is turned on.
1 Press the CONNECT button, located on the bottom of the infrared receiver.
2 Turn the wireless mouse over and slide the power button to the ON position.
3 Press the CONNECT button on the bottom of the mouse.
Connecting the mouse
Additional information about using a wireless mouse
A wireless mouse requires unobstructed communication with the infrared
receiver for proper operation.
To maintain good communication, operate your wireless mouse within 2 feet
❑
of the VAIO® computer.
Confirm that the supplied AA batteries are properly installed.
❑
Press the CONNECT button located on the bottom of the infrared receiver
❑
first, and then press the Connect button on the bottom of the mouse.
Verify the infrared receiver is free of obstructions that may prevent proper
❑
operation.
Avoid using radio-controlled toys or equipment, CB radios, and other
❑
wireless devices in the area near your wireless mouse. These devices may
cause interference, causing your mouse to stop working properly.
Connecting the Wireless Mouse
Power switch
Connect button
45