Table of Contents
Advertisement
the oven cavity.
Gently insert racks and trays into the
oven until they come to a stop.
Clean the trays before using them for
the first time to remove any residues left
by the manufacturing process.
Tray rack
The tray rack has to be inserted into the tray. In
this way fat can be collected separately from
the food which is being cooked.
Digital programmer
The parameters and values for the currently
selected function will be indicated on the
display. To use it, just turn the function and
temperature knobs to select the indicated
values.
Clock indicator light
Minute minder indicator light
Cooking indicator light
Programmed cooking indicator light
Door lock indicator light (pyrolytic models
only)
Control lock indicator light
12 - USE
Showroom indicator light
Defrost indicator light
Temperature indicator light
First use
If the time is not set, the oven will not
switch on.
On the first use, or after a long power failure, the
message
appliance's display. To be able to start any
cooking function, the current time must be set.
1. Turn the temperature knob to select the
current time.
2. Press the temperature knob to set the current
time and go to the selection of minutes.
3. Turn the temperature knob to select the
minutes of the current time.
4. Press the temperature knob to finish
adjustment.
It may become necessary to change the
current time, for example for daylight
saving time.
When the current time is visible, after 2
minutes from the last knob operation it is
displayed with low brightness.
Using the oven
See General safety instructions.
Traditional cooking
Cooking functions can be interrupted at
any time by turning the function knob to
the 0 position.
1. Turn the function knob to the right or to the
left to select the wished function (for
example "FAN-ASSISTED
2. Turn the temperature knob to the right or to
the left to select the wished temperature (for
example "200°C").
Wait 3 seconds (or press the temperature knob
before waiting 3 seconds) to start cooking.
After having started cooking, press the
temperature knob to enter any setting of
will flash on the
").
91477A235/B
Advertisement
Table of Contents
