Table of Contents
Advertisement
SAMSUNG
II I II I I II II I I
Ill II
I
llllll 111111111111111111
01 USING THE REMOTE CONTROL
AH81-17184A-00
NSPBI01543A-00
II
Power
II
~(Mute)
II
SOUND MODE
II
cg')]
(Source)
Press to select a source connected
to the Sound bar.
By pressing the button, you can select the desired
audio mode such as Surround, Game Pro, Standard,
Adaptive Sound.
II *
Bluetooth PAIR
II
i
(i nfo)
Switch the Sound bar to Bluetooth
pairing mode.
Press to display information about the active function
or the codec available.
II
Up/ Down/ Left/
Right
II
II
HI
(Play
/
Pause)
m
CH LEVEL
In
BT
mode, it displays the connected device (when
pairing is complete) or"BTready" (when pairing is
required).
VOLUME
WOOFER (BASS) LEVEL
Push the button up or down to adjust the level of the
woofer (bass).
Ill
By pressing the button, you can adjust the volume of the each speaker such as Center level, Side
level, Wide level, and Front Top level.
@
(Sound Control)
II
By pressing the button, you can set the audio function such as SpaceFit Sound, AVA, Voice enhance
mode, Night mode, Sync, Virtual.
The desired settings can be adjusted using the Up/
Down
buttons.
TONE CONTROL
m
By pressing the button, you can adjust the volume of the treble or bass sound. The desired item can
be adjusted using the Up/
Down
buttons.
02 INSTALLING THE SOUNDBAR
Installation Precautions
•
Install on a vertical wall only.
•
Do not install in a place with high temperature or humidity.
•
Verify whether the wall is strong enough to support the product's
weight. If not, reinforce the wall or choose another installation
point.
•
Purchase and use the fixing screws or anchors appropriate for
the kind of wall you have (plaster board, iron board, wood, etc.). If
possible, fix the support screws into wall studs.
Installing the Sound bar above a TV Stand
~
Rubber-Foot
~~iol
NOTE
•
Make sure the Sound bar is placed on a flat and solid surface.
•
Purchase wall mounting screws according to the type and
thickness of the wall you want to mount the Sound bar on.
-
Diameter: MS
-
Length: 1 3/8 inches (35 mm) or longer recommended.
•
Connect cables from the unit to external devices before you
install
the Sound bar on the wall.
•
Make sure the unit is turned off and unplugged before you install
it. Otherwise, it may cause an electric shock.
➔
•
Insufficient gap from the TV may cause voice recognition and acoustic problems.
•
As illustrated in the image, align the center of the Soundbarwith the center of the TV, carefully place the Sound bar onto the TV stand. At this
time, place the microphone at the front of the stand not to interfere
with
voice recognition.
•
The illustration above may differ with the model.
Advertisement
Table of Contents
