Table of Contents
Advertisement
Using the SpaceFit Sound
This function analyzes the user's listening space with the
Soundbar's microphone and provide optimal sound for the
space.
Sound optimization proceeds automatically.
05 USING A WIRELESS
CONNECTION
Connecting via Bluetooth
Top of the Sound bar
OR
D
··*··
OR
What is the difference between BT READY and BT
PAIRING?
•
BT READY
:
In this mode, you can reconnect any
Samsung TV or mobile device that was connected
before.
•
BT PAIRING
:
In this mode, you can connect a new device
to the Sound bar.
(Press the
*
PAIR
button on the Sound bar remote
control or press and hold the
0
(Mic
On/
Off)
button on
the top of the Sou ndbarfor more than 5 seconds while
the Sou nd ba
r
is in
"BT"
mode.)
NOTE
•
If asked for a PIN code when connecting a Bluetooth
device, enter <0000>.
Connecting via Wi-Fi (Wireless
Network}
•
To connect a Sound bar to a mobile device via a wireless
network (Wi-Fi), the
SmartThings
app is required.
1.
Connect your mobile device (smartphone, tablet, etc.) to
the Wi-Fi network the TV is connected to.
2.
Install and launch the
SmartThings
app on your mobile
device (smartphone, tablet,
etc.).
3.
Follow the instructions in the app screen on the mobile
device to connect the Sound bar to
your Wi-Fi network.
06 TROUBLESHOOTING
Refer to the instructions below if this product does not
function properly. If the problem you are experiencing is
not listed below or if the instructions below do not help,
turn off the product, disconnect the power cord, and
contact Samsung Electronics atl-800-SAMSUNG (1-800-
726-7864).
Sound
bar
does not turn
on.
•
Check whether the power cord of the Sound bar is
correctly inserted into the outlet.
When the subwoofer is not automatically connected
1.
Turn off the Sound bar main unit.
2.
Press and hold
ID SET
on the rear of the subwoofer for
at least 5 seconds.
Rear of Subwoofer
"Blinking blue
fast"
3.
Press the
Up
button on the remote control for
5 seconds.
4.
Check if the LINK LED is solid blue (connection
complete).
•
The LINK LED indicator stops blinking and glows
a solid blue when a connection is established
between the Sound bar and the Subwoofer.
Sound bar works
erratically.
•
After removing the power cord, insert it again.
•
Try again after initializing the product.
•
If there is no signal, the Sound bar automatically turns
off after a certain period of time. Turn on the power.
Remote control does not work
•
Point the remote directly at the sound bar.
•
Replace the batteries with new ones.
The Sound bar indicator turns solid
red.
•
The microphone is turned off.
Turn on the microphone.
Advertisement
Table of Contents
