Using The Soundbar Remote Control; Inserting Batteries Before Using The Remote Control; How To Use The Remote Control - Samsung HW-Q930D User Manual

Hide thumbs Also See for HW-Q930D:
Table of Contents

Advertisement

Available languages

Available languages

03 USING THE SOUNDBAR REMOTE CONTROL

Inserting Batteries before using the Remote Control (AAA batteries X 2)
Slide the back cover in the direction of the arrow until it is completely removed. Insert 2 AAA batteries
(1.5V) oriented so that their polarity is correct. Slide the battery cover back into position.

How to Use the Remote Control

SOUNDBAR
Sound Control
Play / Pause
Turns the Soundbar on and off.
• Auto Power Down Function
The unit turns off automatically in the following situations:
Power
• In TV ARC or eARC, HDMI, Wi-Fi, BT, D.IN mode if there is no audio signal for 18 minutes.
Press to select a source connected to the Soundbar.
• Voice Feedback On/Off
Source
You can turn on or off the Voice Feedback.
Press and hold the
Soundbar is off (Standby mode).
Each time you change the Voice Feedback setting, the display will show "AUI OFF"
(Default) or "AUI ON".
Switch the Soundbar to Bluetooth pairing mode. Press the button and wait for the "BT
PAIRING" screen to connect to a new Bluetooth device.
Bluetooth PAIR
Press the
Press it again to unmute the sound.
Mute
By pressing the button, you can select the desired audio mode such as Surround, Game Pro,
Standard, Adaptive Sound.
• Standard
SOUND MODE
Outputs the original sound.
• Surround
Provides a wider sound field than standard.
• Game Pro
Provides stereoscopic sound to immerse you in the action while gaming.
• Adaptive Sound
Analyzes the content in real time and automatically provides the optimal sound field
based on the characteristics of the content.
By pressing the button, you can adjust the volume of the each speaker such as Center level,
Side level, Wide level, Front Top level, Rear level, and Rear top level.
• To control the volume of the each speaker select Center level, Side level, Wide level, or
CH LEVEL
Front Top level in Sound Settings, and then adjust the volume between -6~+6 by using the
Up/Down buttons.
• If Surround Speakers are connected, select Rear level or Rear top level and then use the
Up/Down buttons to adjust the volume within a -6 to +6 range.
• CH LEVEL specifications may differ with the respective model.
By pressing the button, you can set the audio functions such as SpaceFit Sound, AVA, Voice enhance mode, Night
mode, Sync, Surround speaker mode, Virtual, Private Rear Sound, and Sound Grouping. The desired item can be
adjusted using the Up/Down buttons.
• Refer to "Setting the
(Sound Control)" on page 7.
You can also play or pause music by pressing the button.
(Source) button on the remote control for 5 seconds while the
(Mute) button to mute the sound.
ENG - 6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hw-q800dHw-q700d

Table of Contents