Cleaning Schedule - Scotsman TC180 Cleaning & Sanitizing Procedure

Cleaning Schedule

WARNING; Before carrying out any cleaning operation, please ensure that the ice maker is
disconnected from the electrical supply.
NOTE – If external stainless steel panels are not cleaned regularly, brown stains could begin to show.
It is important to prevent these brown stains forming on these stainless steel surfaces otherwise
there is a risk of a chemical reaction which could penetrate the chromium oxide film, this could
result in a 'rust' and 'pitting' of the panels.
Do not use abrasive products, such as steel wool pads, acids etc. Since these could damage the
various surfaces. In case of persistent stains, normal abrasive detergents or products specific for
stainless steel are readily available on the market.
Suggested Weekly Cleaning.
Pull out the removable condenser air filter on the front of the machine, vacuum to clean or wash in
clean water and dry, refit it in to the runner moulding once complete.
Wipe all external stainless steel panels & front panel assembly with a soft cloth and suitable
sanitising solution (Or pre-impregnated sanitizing wipes specific to the task).
Empty/Scoop out all the ice cubes stored into the bin in order to prevent them from being
contaminated with the cleaning solution used.
Wipe clean and rinse the inner surfaces of the storage bin using an appropriate sanitising product
along with the cleaning of the ice level sensor lenses on the inside of the unit storage bin.