Table of Contents
Advertisement
❏
For a flash memory drive, plug it into the EXT.
I/F port on the back of PictureMate.
Note:
If you want to save specified photos only, select
the photos first.
Press x Menu.
5.
Select Save Photo(s), then press OK.
6.
7.
Select All Photos or Selected Photos, then press
OK.
Note:
If you have not selected any photos, Selected
Photos is grayed out.
8.
When the confirmation message appears, press
OK.
9.
If you want to print an index of the saved photos,
select Print Backup Index and then press OK.
The printer starts printing photos to be saved in
Backup Index layout after saving the photos to a
disk. This layout prints a maximum of 56
thumbnails. Load 10 × 15 cm photo paper in the
paper feeder.
If you do not want to print an index of the saved
photos, select Do Not Print and then press OK.
10. Follow the instructions on the LCD screen to save
photos.
Note:
You cannot cancel saving data once it has started.
11. When saving photos has finished, press OK.
Saving Your Photos (Backup)
PictureMate PM 270
37
Advertisement
Table of Contents
