Service Check List - Countax B MK4 Series Operator's Manual

This unit must be fully serviced after 100 hours run time by an approved dealer only. This tractor should also be
visually checked by the user before every use, weekly, when prompted by the digital display at Ins1 and again at
Ins2.
Before every use
Check
All safety guards
Machine is free from grass
Deck is properly secured
PGC or other rear accessory is
properly secured
Weekly
Check
All safety guards
Machine is free from grass
Deck is properly secured
PGC or other rear accessory is
properly secured
Engine oil level
Ins 1 (after 20 hours usage)
Check
Deck pins are secure
PGC or other rear accessory is
secure
PGC securing clamps are working
and in good condition
Net is secure and all mechanisms
functioning as required
Net is intact and mesh is free
from holes
Dashboard components are
functioning as described in this
manual
Tyre condition and pressure
Engine oil level

Service Check List

Check Type Check
Deck pins are secure
PGC or other rear accessory is
secure
PGC securing clamps are working
and in good condition
Net is secure and all mechanisms
functioning as required
Net is intact and mesh is free
from holes
Check Type
Steering handling
Deck drive belt condition
PTO rear accessory drive belt
condition
Parking brake condition
Tyre condition and pressure
Transaxle oil level
Check Type
Check
Complete Service
KEY
Page 50
Ins 2 (after 50 hours usage)
Ser (Full service after 100 hours usage)
Visual checks only
Low level maintenance
Check Type
Check Type
Must be
carried out
by approved
dealer only