Printing From A Mobile Phone Or Other Peripheral Device; Infrared Transfer - Sagem PHOTO EASY 160 User Manual

Liasse AZUR_GB.book Page 24 Jeudi, 21. avril 2005 4:09 16
7 P
RINTING FROM A MOBILE PHONE OR OTHER PERIPHE
RAL DEVICE
Warning :
If a memory card is inserted in the printer, you cannot access infrared or bluetooth
transfer mode.
Your photo printer allows you to print photos stored in your mobile phone, PDA
or PC. For this, you need to transfer them to the printer using the infrared or
bluetooth link (for bluetooth, use the optional bluetooth adapter).
On the photo printer, press and hold the On/Off button
appear on screen.
Remark : For a list of compatible devices, go to www.sagem.com.
I
NFRARED TRANSFER
Warning :
If you have started transfer by Bluetooth, you will not be able to transfer photos by
infrared if you have not before hand erased be internal memory by holding the key
down for 3 seconds
Place the infrared window of your device face-to-face with the corresponding
window of the photo printer, at a distance not exceeding 30 centimetres.
Warning :
In an environment exposed to intense light, a distance of no more than 10 centimetres
between the two infrared windows is recommended.
Select a photo on your device and launch its transfer via the infrared link.
- 24 -
-
until three dashes
C