Prepare Your Photo Printer; Connect The Mains Supply - Sagem PHOTO EASY 160 User Manual

Liasse AZUR_GB.book Page 6 Jeudi, 21. avril 2005 4:09 16
4 P Y
REPARE OUR
C
ONNECT THE MAINS SUPPLY
Remark : When installing your printer near a wall or some other object, keep an open space of at
least 4 inches at the back of the printer, to make sure the movement of the sheet of paper
being printed is not obstructed.
Please refer to the safety instructions at the beginning of this user guide
before making any connections.
Insert one end of the mains lead into the corresponding socket of the power
supply.
Connect the power supply to the printer as shown in the illustration below.
Plug the other end of the power supply mains lead into a wall socket.
Press and hold the On/Off button [x] on the top panel of the printer until three
dashes appear on screen.
Your printer has two USB connectors:
- a SCSI Mass storage master USB connector (A) for connecting a camera
(PictBridge mode), USB key or Bluetooth adapter...,
- a slave USB connector (B) for connecting to a master terminal (such as a
PC)
Remark : To obtain the list of devices compatible with this USB port (A), visit the site
www.sagem.com.
P P
HOTO RINTER
A
B
- 6 -
A
B