Table of Contents
Advertisement
C. Tools and Supplies Needed
Before beginning the installation be sure the following
tools and building supplies are available:
Reciprocating saw
Pliers
Hammer
Phillips screwdriver
Flat blade screwdriver
Plumb line
Level
1/2-3/4 in. length, #6 or #8 self-drilling screws
Misc. screws and nails
D. Inspect Fireplace and Components
WARNING! Risk of Fire and/or Explosion!
parts could impair safe operation. DO NOT install dam-
aged, incomplete or substitute components. Keep fire-
place dry.
•
Remove fireplace and components from packaging and
inspect for damage.
•
Vent system components and doors are shipped in
separate packages.
•
Report to your dealer any parts damaged in shipment.
•
Read all the instructions before starting the
installation. Follow these instructions carefully
during the installation to ensure maximum safety
and benefit.
Majestic Biltmore Series • SB100 • 4013-303 Installers Manual • Rev H • 08/20
8
Framing material
Non-combustible sealant
Gloves
Framing square
Electric drill and bits
Safety glasses
Tape measure
Damaged
E. Fireplace System Requirements
The HHT fireplace system requirements consist of the
following:
•
Fireplace
-
Refractory (included with fireplace)
-
Firescreen (included with fireplace)
-
Grate (included with fireplace)
-
Hearth Extension (required, sold separately)
•
Outside Air System
-
Air Inlet Hood (included with fireplace)
-
Flex (required, sold separately)
•
Chimney System
-
Attic Insulation Shield (included with fireplace)
-
Chimney termination cap (required, sold separately)
•
Non-combustible finish material
Advertisement
Table of Contents
